Disclosure: this post contains affiliate links. If you buy through them, we may earn a commission at no extra cost to you.
Need to know when to replace your Alexapure replacement filter? This complete guide covers everything about Alexapure filter replacement, from recognizing the signs to step-by-step installation instructions.
Quick Answer: Alexapure Water Filter Replacement
The genuine Alexapure Pro replacement filter is sold by Alexapure as the “Genuine Alexapure Pro Gravity Water Filter.” According to the official Alexapure product page, the current generation filter:
- Is rated for up to 200 gallons per filter, depending on your water quality. The 5,000 gallon figure below applies to older filters, so check the rating on the filter you actually own.
- Fits both the new and the original Alexapure Pro. It includes an adapter for original systems.
- Arrives ready to use, with no priming or flushing required.
- Can be used in sets of up to four filters. Each added filter raises flow and capacity (two filters, up to 400 gallons; four filters, up to 800 gallons).
The simplest replacement signal, per Alexapure: a significant drop in flow rate.
When to Replace Your Alexapure Filter
The Alexapure Pro filter is rated for 5,000 gallons of water filtration. For a typical family of four using about 1 gallon per day, this translates to roughly 13 years of use. However, water quality affects filter life significantly.
Signs your Alexapure replacement filter is needed include dramatically reduced flow rate even after cleaning, unusual taste in filtered water, and visible damage to the filter element. If you notice any of these signs, it is time for a new filter.
Where to Buy Alexapure Replacement Filters
Genuine Alexapure replacement filters are available directly from the manufacturer and authorized retailers. We recommend purchasing from official sources to ensure you receive authentic filters with full warranty coverage.
➡️ Check Current Price on Alexapure Replacement Filters
How to Replace Your Alexapure Filter
Replacing your Alexapure filter takes just a few minutes. First, empty both chambers and remove the old filter by unscrewing it from the bottom of the upper chamber. Clean both chambers with mild soap and rinse thoroughly.
Before installing your new Alexapure replacement filter, prime it by submerging in water and running water through it several times. This removes loose carbon particles and prepares the filter for optimal performance.
Screw the new filter into place, reassemble the unit, and run 2-3 full batches of water through before drinking. This flushes out any remaining manufacturing residue and ensures clean, great-tasting water from your first use.
Alexapure Filter Maintenance Tips
Extend your Alexapure filter life with regular maintenance. Clean the filter surface monthly using a Scotch-Brite pad under running water. This removes sediment buildup and maintains optimal flow rate.
Store extra Alexapure replacement filters in a cool, dry place. Unopened filters have an indefinite shelf life, making them perfect for emergency preparedness stockpiles. Keep at least one spare filter on hand so you are never without clean water.
Cost Comparison: Alexapure Filters vs Bottled Water
At roughly 2 cents per gallon, Alexapure filtered water costs a fraction of bottled water prices. Over the 5,000 gallon filter life, you will save over 500 dollars compared to buying bottled water while enjoying superior filtration quality.
Investing in Alexapure replacement filters is one of the smartest decisions for your family health and budget. Stock up today and ensure your family always has access to clean, safe drinking water.
Troubleshooting Common Filter Issues
If your Alexapure filter flow slows down quickly after cleaning, your source water may contain high sediment levels. Consider pre-filtering through a cloth or coffee filter first. This extends filter life significantly and maintains consistent flow rates.
Air bubbles trapped in the filter can also reduce flow. Simply remove the filter, submerge it completely, and shake gently to release trapped air. Reinstall and your flow rate should improve immediately.
Alexapure Replacement Filter FAQ
How do I know I am getting a genuine Alexapure Pro replacement water filter?
Buy from Alexapure or an authorized retailer. Third-party filters sold as “compatible with Alexapure” are not made by Alexapure, and their performance claims are the seller’s own, not Alexapure’s published test results.
Will a new Alexapure filter fit my older Alexapure Pro?
Yes. Alexapure says the new filter works with both generations of the system and ships with the adapter needed for original units.
Do I still need to prime a new Alexapure filter?
Not the current generation filter. Alexapure says it needs no priming or flushing. The priming steps above apply to older filters, so follow the instruction manual that comes in your box.
I have never used my spare filter. Is it still good?
Yes, if it stayed sealed. Alexapure says unused filters can be stored indefinitely in their original sealed mylar packaging, kept cool, dry and away from sunlight, humidity and chemicals like cleaning supplies, paint or gasoline.
Can I wash the filter with soap?
No. Alexapure says to gently clean the filter exterior under running water and never use soap or detergent on the filter. Mild soap is fine for the stainless steel chambers.
Conclusion
Keeping your Alexapure system running optimally with timely filter replacements ensures your family always has access to clean, safe drinking water. Stock up on Alexapure replacement filters today and never worry about your water quality again.